Then use a razor knife to trim the UHMW to fit the shape of the hanger by trimming away any excess material as well as cutting out the king pin bolt hole. After assembling, the hanger play is greatly reduced against the base plate and with the UHMW rubbing against the baseplate. One or two layers of tape can be applied depending on the gap between the hanger and baseplate. The UHMW film runs $2.00/pc. or if you want to do a few trucks, $7.00/ft. which is probably enough to do 6-8 trucks depending on how carefully you cut the material. Contact 4CrawlR@gmail.com for details.   (50/70)