Toyota 4Runner / Hilux Surf
Body Lift Kit Pricing/Ordering Page
After 25 years in operation, it's time to close up shop and move on to other adventures. Thanks to all the loyal customers over the years that helped to make this all possible. The web site will remain live.
Contents:
- Introduction
-
Click here to place an order...
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
- Returns and exchanges
- Cancellation Policy
- Return to the main Body Lift page
Introduction:
- Up to 3" on '84 -'89 (1st gen):
-
Up to 3" on '90 - '95 (2nd gen):
- Leo Castenada is running a 1" body lift on his '95 automatic
- 3.0L V6 4Runners may have problems at 3" with the stock engine air intake, modifications will be needed
-
Up to 3" on '96 - '02 (3rd gen):
- Adam Fertig did a nice installation write-up
- Bolt on 9th and 10th body mount brackets for '96 4Runner available for $80.00/pair, useable w/ and w/o body lifts.
- 3" available but may require gas tank filler hose extensions, etc.
- Note: Front bumper bracket on '00 - '02 4Runner kits may need to be drilled to accept bumper relocation bracket
- If running more than 2" of front suspension lift, a front differential drop kit may be installed.
-
Limitations:
- For RHD models w/ 3.0L turbo-diesel engines, bolt-in steering ext. beyond 1" may not fit, cutting and welding an ext. into the shaft itself may be required.
-
On 3rd gen 4Runner with the 3.4L-V6 engine and Edelbrock headers, you
may experience clearance issues at the steering rag joint when the body lift
steering spacer is installed.
- You can check for vertical clearance above the rag joint to the exhaust header, the spacers are approx. the same (3") diameter as the rag joint and a 1" lift spacer is approx. 3/4" tall, 1.5" lift spacer is 1-1/4" tall, 2" lift spacer is approx. 1-3/4" tall and 3" lift spacer is approx. 2-1/2" tall.
- 1" body lift seems to be the maximum lift in this application, but feel free to measure for yourself.
- On trucks with 4" ProComp lifts, steering extension beyond 5/8" tall may not clear the steering rack drop bracket.
- Up to 2" on 2003-2009 (4th gen) / LX-450
- Up to 1" on 2010+ (5th gen) / LX-460
-
1/2" lift blocks (only) are available for all models above
- Typically no need for longer hardware, assuming ~1/2" of excess bolt length on factory hardware
- Use the 1" lift block pricing (kit A or B) for the given vehicle
- Shipping is only $8.00 in the US and $33.00 International on the 1/2" block kits
- 1.5" or 2" denotes the option of 1.5" or 2" lift, one or the other, it's not adjustable in height
- The 0" kits can be used for a body lift removal, restoring the vehicle to stock height and optionally replacing all the OEM rubber bushings with polyurethane.
-
We can also produce tapered/progressive body lifts for custom applications:
- In a tapered lift, the lift block heights are stepped up or down from front to back to help level the vehicle.
-
Add US$50.00 (item: TAPER) to the cost of the maximum
desired lift kit and supply us with the following information:
- Lift height front and rear as well as the horizontal distance between the body mount locations starting at the front.
- For example on the 3rd gen 4Runner, Front-A = 54", A-B = 23", B-C = 38", C-Rear = 44" for the 5 pair of body mounts.
- For example on the 4th gen 4Runner, Front-A = 43", A-B = 66.5", B-Rear = 53" for the 4 pair of body mounts.
- For example with a lift tapering from 2" in front to 1" in back would raise the front end 1" higher than the back if that were your goal.
-
Hardware:
- For hardware-only orders, use the 0"-kit D pricing and specify the lift height in the order description.
- Shift Lever (SL) extensions of 2" and 3" length for transmission and transfer case shifter with screw-on knobs, only.
-
In the pricing tables below, the "Typical
Kits" for each given lift height and vehicle is listed:
- Both in an itemized list at the bottom of each lift height and as bold text in the table columns.
-
The "Typical Kit" contains those parts typically needed to
lift a typical vehicle that height, thus the name "Typical
Kit".
- 0" typical kit would also be called a "body lift removal kit"
- A typical vehicle is one that is somewhat close to stock, that is has the stock engine, stock steering, stock bumpers, etc.
-
Note, things like suspension lifts, larger than stock tires, etc. have
little or no impact on a body lift.
- After all, all those things do is to raise the frame higher off the ground. A body lift in turn simply raises the body off the frame. So in a sense the body lift could care less what sort of suspension or tires are sitting below the frame.
-
Feel free to add or subtract from the typical kit as your needs
dictate;
- For example if you have a custom front bumper, subtract the Front Bumper (FB) brackets from your kit and adjust the price accordingly.
- Or if you wish to upgrade to the Heavy Duty hardware, add the HD option to your kit and adjust the price accordingly.
-
Add the AT bracket item (ATbrkt) for 2" and
3" lifts on vehicles with automatic transmissions where that
option is listed.
- Generally required at 2" and above, available in 2" and 3" versions
-
Add the AT linkage extension item (AText) is
typically needed at 3" lift, it can be installed at a 2" lift
but typically not needed.
- At 1.5" lift, measure the clearance between the shift linkage and the transfer case and decide if you'll need a 2" bracket or not.
- For 2WD automatics, if you have the adjustable shifter linkage along the transmission, the AT linkage extension (AText) in case you run out of adjustment in the linkage.
-
Notes:
- Clicking on the links under the DESCRIPTION column in the tables below take you to a DESCRIPTION OF THE ITEM.
- If an item price is listed under a given height but not highlighted as part of the typical kit, that means it is not typically ordered as part of the typical kit, but can be installed if desired. Consult the installation notes for that item to see what other options are available in lieu of installing that particular item.
- If an item is listed as "n/a" under a given lift height, it is "not applicable" or "not available" at that given height.
- If you want to order that kit or item, click on the shipping/ordering link.
- There are six basic body lift kit packages to cover the following model years of the Toyota 4Runner/Hilux Surf (4WD and 2WD). Why the date and model ranges below? Note that we are using the model years for the US/North America versions. In some parts of the world, there is a deviation from these dates in the 2nd generation Hilux Surf models. In the US, 1995 was the last model year with torsion bar front suspension, but in other parts of the world, the 1996+ models also used torsion bar front suspension. If your Hilux Surf has torsion bar front suspension (as opposed to the coil over spring front suspension), then use the 1990-1995/2nd gen. 4Runner kits. The grouping below are where there were significant changes in the vehicle design that affects the body lift components to the point where a different kit is needed. Within a given date/model range, all body lift kit components are the same:
-
The body lift kits can consist of any of the following items:
-
Body lift blocks:
-
Ultimate blocks in UHMW polyethylene:
- 2 - 2" OD and 8- 2.5" OD blocks for the body (6 on the 4th gen 4Runner/Hilux Surf)
- Natural color is white, may be custom colored in black with the CLR option
- For lifts between the heights listed below, use the next higher kit price, e.g. for a 1.5" lift, use the 2" pricing
-
Ultimate blocks in UHMW polyethylene:
-
Hardware is available in several options.
- Standard grade (Grade 5) hardware is included in kits D, includes longer bolts for each body mount location
- Hardware may be upgraded to Heavy Duty (Grade 8) by ordering the HD option
-
Hardware may be upgraded to Stainless Steel by ordering the SS option,
where applicable
- HD and SS are mutually exclusive, that is there is no HD+SS option
- The HDw option may be included withy any hardware option to obtain heavy duty, oversized bottom washers.
-
Optional Front Bumper brackets to raise the stock front bumper to match
the lift
- On '84/'85 models, front bumper brackets only available in 1 inch increments (i.e. 1", 2", 3", but not for 1.5")
- Optional Radiator drop brackets to lower the radiator to align with the stock radiator fan
- Optional Bed Spacers can be used to support the center of the cargo bed over the rear wheels, if needed
- Optional Shift lever extensions that screw onto the shift lever to extend it 2" or 3" to match the lift
- Optional Automatic transmission/transfer case bracket extensions for externally shifted transfer cases
- Optional Polyurethane body mount bushings to replace the stock rubber bushings, if needed.
- Optional custom color option for the lift blocks themselves, white is the native color of the material, black is the default custom color (CLR)
-
Body lift blocks:
-
NOTE: Pricing on this page reflects the
"kit discount" on certain items when purchased as part of a
body lift kit.
- For ordering individual items, consult the main body lift kit page...
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
1984-1989 (1st Gen) 4Runner/Hilux Surf (US $):
| Kit | 0"/stock | up to 1" | 1.5" or 2" | 3" | Description |
| A | n/a | $ 40.00 | $ 50.00 | $ 60.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 48.00 | $ 62.00 | $ 76.00 | Ultimate Lift Blocks (2-2" OD and 8 - 2.5" OD) |
| C | $ 30.00 | $ 65.00 | $ 75.00 | $ 85.00 | Kit A+ Standard grade hardware |
| D | $ 30.00 | $ 73.00 | $ 87.00 | $101.00 | Kit B + Standard grade hardware |
| AL | n/a | $ 50.00 | n/a | n/a | Change kit A or C to ALuminum lift blocks |
| HD | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Upgrade Kit C or D to Heavy Duty bolts |
| HDn | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Upgrade HD kit to include Grade 8 nuts |
| HDw | $ 20.00 | $ 20.00 | $ 20.00 | $ 20.00 | Includes heavy duty, oversized washers for body mount bolts |
| SS | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to Stainless Steel hardware |
| MET | $ 30.00 | $ 30.00 | $ 30.00 | n/a | Grade 8.8 METric hardware upgrade |
| CLR | n/a | $ 10.00 | $ 10.00 | $ 10.00 | Custom color lift blocks |
| FB | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Front bumper brackets |
| RAD | n/a | $ 15.00 | $ 15.00 | $ 15.00 | Radiator drop brackets |
| SL | n/a | n/a | $ 15.00 | $ 20.00 | Shift Lever Extension (per lever), 2" and 3" lengths |
| ATbrkt | n/a | n/a | $ 50.00 | $ 50.00 | A/T linkage brackets for 4WD Automatics, needed for 2"-3" |
| AText | n/a | n/a | $ 10.00 | $ 10.00 | A/T linkage extension for transmission linkage for 2"+ |
| SE | $ 5.00 | n/a | $ 40.00 | $ 40.00 | Steering Shaft Extension (if needed) |
| BS | n/a | $ 8.00 | $ 10.00 | $ 12.00 | Bed Spacers, per pair |
| P | $120.00 | $115.00 | $115.00 | $115.00 | Polyurethane Body Mount Bushings |
| DOC | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | B/W Printed installation notes |
| CDOC | $ 8.00 | $ 8.00 | $ 8.00 | $ 8.00 | Full color printed installation notes |
| Typical | D+P | D+FB | D+FB+RAD | D+FB+RAD | Typical Kit Contents |
| Cost | $150.00 | $ 93.00 | $122.00 | $136.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
For Heavy Duty (HD),
Stainless Steel (SS) or Metric (MET) hardware upgrade,
kit C or D must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+SS upgrade.
- HDn swaps the grade 5 lock nuts for grade 8, n/a for METric or SS h/w upgrade
-
HDw adds hardened, oversized
bottom washers for the body mount bolts.
- Order these if you don't want to re-use your original bottom washers, especially recommended with Poly bushings
- For ALuminum block upgrade (AL), kit C must also be ordered.
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
- If removing a body lift with a rag joint steering extension, order the 0" SE kit item to get a pair of stock length rag joint bolts
- P - Poly bushings available in black color
- FB - 1.5" front bumper brackets not possible on the '84/'85 models
-
ATbrkt/AText option for automatic transmission:
- 4WD: 2" = AT bracket, 3" = AT bracket + linkage extension
- 2WD: 3" AT linkage extension, can be used at 2" if desired
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
1990-1995 (2nd Gen) 4Runner/Hilux Surf (US $):
Polyurethane body mount bushings P
includes spacers for the rear 2 pair of bushings
| Kit | 0"/stock | up to 1" | 1.5" or 2" | 3" | Description |
| A | n/a | $ 40.00 | $ 50.00 | $ 60.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 48.00 | $ 62.00 | $ 76.00 | Ultimate Lift Blocks (2-2" OD and 8 - 2.5" OD) |
| C | $ 35.00 | $ 70.00 | $ 80.00 | $ 90.00 | Kit A+ Standard grade hardware |
| D | $ 35.00 | $ 78.00 | $ 92.00 | $106.00 | Kit B + Standard grade hardware |
| AL | n/a | $ 50.00 | n/a | n/a | Change kit A or C to ALuminum lift blocks |
| HD | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Upgrade Kit C or D to Heavy Duty bolts |
| HDn | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Upgrade HD kit to include Grade 8 nuts |
| HDw | $ 16.00 | $ 16.00 | $ 16.00 | $ 16.00 | Includes 8 heavy duty, oversized washers for body mount bolts |
| SS | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to Stainless Steel hardware |
| MET | $ 30.00 | $ 30.00 | n/a | n/a | Grade 8.8 METric hardware upgrade |
| CLR | $ 4.00 | $ 10.00 | $ 10.00 | $ 10.00 | Custom color lift blocks |
| FB | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Front bumper brackets |
| RAD | n/a | $ 15.00 | $ 15.00 | $ 15.00 | Radiator drop brackets |
| SL | n/a | n/a | $ 15.00 | $ 20.00 | Shift Lever Extension (per lever), 2" and 3" lengths |
| ATbrkt | n/a | n/a | $ 50.00 | $ 50.00 | A/T linkage brackets for 4WD Automatics, needed for 2"-3" |
| AText | n/a | n/a | $ 10.00 | $ 10.00 | A/T linkage extension for transmission linkage for 2"+ |
| SE | $ 5.00 | n/a | $ 40.00 | $ 40.00 | Steering Shaft Extension (if needed) |
| BS | n/a | $ 8.00 | $ 10.00 | $ 12.00 | Bed Spacers, per pair |
| P | $200.00 | $190.00 | $190.00 | $190.00 | 10 - Polyurethane Body Mount Bushings |
| P4 | $100.00 | $ 90.00 | $ 90.00 | $ 90.00 | 4 - Polyurethane Body Mount Bushings |
| Phw | $25.00 | $25.00 | $25.00 | $25.00 | Polyurethane Body Mount h/w |
| DOC | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | B/W printed installation notes |
| CDOC | $ 8.00 | $ 8.00 | $ 8.00 | $ 8.00 | Full color printed installation notes |
| Typical | D+P+HDw | D+FB | D+FB+RAD | D+FB+RAD+SE | Typical Kit Contents |
| Cost | $251.00 | $ 98.00 | $127.00 | $181.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
For Heavy Duty (HD),
Stainless Steel (SS) or Metric (MET) hardware upgrade,
kit C or D must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+SS upgrade.
- HDn swaps the grade 5 lock nuts for grade 8, n/a for METric or SS h/w upgrade
-
HDw adds hardened, oversized
bottom washers for the body mount bolts.
- Order these if you don't want to re-use your original bottom washers, especially recommended with Poly bushings
- As the poly bushing kits we supply, come with new bottom washers for the radiator core mounts, our default kit includes 8 additional washers. If you want more or less washers, they are US$2.00/ea.
- For ALuminum block upgrade (AL), kit C must also be ordered.
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
- With the 0" poly bushing kit (P), this colors the 4 spacers to match the poly bushings
- If removing a body lift with a rag joint steering extension, order the 0" SE kit item to get a pair of stock length rag joint bolts
-
ATbrkt/AText option for automatic transmission:
- 4WD: 2" = AT bracket, 3" = AT bracket + linkage extension
- 2WD: 3" AT linkage extension, can be used at 2" if desired
-
Kits including Poly bushings will include either spacers or
lift blocks of varying heights.
- This is done to make up the height differences of the factory rubber body mounts and the replacement poly bushings.
- If you want the spacer color to match the bushing color, you can either paint the spacers or add the CLR option to get those spacers in black.
- If you add up the height of the spacer (or taller lift block) and the height of the poly bushing, it should be of comparable height to the rubber bushing.
-
If you have an existing body lift kit and wish to install a poly
bushing kit, you have two options.
- 1: Order kit P and then place the spacers above or below your existing body lift blocks.
- 2: Order replacement body lift blocks (kit C or D)) along with the poly kit to get the lift blocks with integrated spacers as well as appropriately sized hardware for the lift+poly bushings.
- With option 1, you can change/remove the body lift easier in the future. With option 2, you have a one piece solid lift block. Both options work, it's up to you as to which is better.
- We've seen some variation in required bolt lengths for the C-pillar poly bushing. We supply a bolt that is long enough to fit the longest length required, but in a few cases, that bolt might be a bit too long. If you find the nut bottoming out on the un-threaded portion of the bolt, simply add a few washers under the head of the bolt to take up the extra length.
- If installing a poly bushing kit after installing a body lift kit, you may find the rear 4 bolts might be a bit too long since our poly bushings in those locations are shorter in overall height than the OEM bushings. If you find the nuts are bottoming out on the bolt threads, you can add a washer or two between the nut and the bushing. This will take up the extra bolt shank length.
- The 2 pair of 1-piece body mounts that bolt to the frame assume re-use of the OEM mounting bolts. If you'ld like to replace those, add the Phw hardware kit that includes replacement bolts and nuts to secure the body mount flanges to the frame bracket.
- For customers who have already purchased a 6-mount pickup/Tacoma cab mount bushing set, which are being incorrectly sold as a 4Runner bushing kit, we can supply the remaining 4 bushings for the rear of the body with kit item P4. This will allow you to use the 6 bushing kit you already have along with our 4 custom rear bushings to replace all 10 of your OEM body mount bushings.
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
1996 (3rd Gen) 4Runner/Hilux Surf (US $):
| Kit | 0"/stock | up to 1" | 1.5" or 2" | 3" | Description |
| A | n/a | $ 40.00 | $ 50.00 | $ 60.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 48.00 | $ 62.00 | $ 76.00 | Ultimate Lift Blocks (2-2" OD and 8 - 2.5" OD) |
| C | $ 40.00 | $ 75.00 | $ 85.00 | $ 95.00 | Kit A+ Standard grade hardware |
| D | $ 40.00 | $ 83.00 | $ 97.00 | $111.00 | Kit B + Standard grade hardware |
| AL | n/a | $ 50.00 | n/a | n/a | Change kit A or C to ALuminum lift blocks |
| HD | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Upgrade Kit C or D to Heavy Duty bolts |
| HDn | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Upgrade HD kit to include Grade 8 nuts |
| HDw | 20.00 | $ 20.00 | $ 20.00 | $ 20.00 | Includes heavy duty, oversized washers for body mount bolts |
| SS | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to Stainless Steel hardware |
| MET | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to METric hardware |
| CLR | $ 8.00 | $ 10.00 | $ 10.00 | $ 10.00 | Custom color lift blocks |
| FB | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Front bumper brackets |
| RAD | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Radiator drop brackets |
| SL | n/a | n/a | $ 15.00 | $ 20.00 | Shift Lever Extension (per lever), 2" and 3" lengths |
| BBb | $ 95.00 | $ 90.00 | $ 90.00 | $ 90.00 | 9th/10th Body mount Brackets, bolt-on |
| BBw | $ 75.00 | $ 70.00 | $ 70.00 | $ 70.00 | 9th/10th Body mount Brackets, weld-on |
| SE | $ 5.00 | $ 30.00 | $ 45.00 | $ 55.00 | Steering Shaft Extension |
| BS | n/a | $ 8.00 | $ 10.00 | $ 12.00 | Bed Spacers, per pair |
| P | $180.00 | $170.00 | $170.00 | $170.00 | Polyurethane Body Mount Bushings |
| Phw | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Polyurethane Body Mount h/w |
| DOC | $ 2.00 | $ 2.00 | $ 2.00 | $ 2.00 | B/W printed installation notes |
| CDOC | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | Full color printed installation notes |
| Typical | D+P+HDw+BBb | D+FB+SE+BB | bD+FB+SE+RAD+BBb | D+FB+SE+RAD+BBb | Typical Kit Contents |
| Cost | $335.00 | $223.00 | $272.00 | $296.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
For Heavy Duty (HD),
Stainless Steel (SS) or METric (MET) hardware upgrade,
kit C or D must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+SS upgrade.
- HDn swaps the grade 5 lock nuts for grade 8, n/a for METric or SS h/w upgrade
-
HDw adds hardened, oversized
bottom washers for the body mount bolts.
- Order these if you don't want to re-use your original bottom washers, especially recommended with Poly bushings
- For ALuminum block upgrade (AL), kit C must also be ordered.
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
- With the 0" poly bushing kit (P), this colors the 8 spacers to match the poly bushings
- If removing a body lift with a rag joint steering extension, order the 0" SE kit item to get a pair of stock length rag joint bolts
-
BBx: The 0" kit price includes the body mount h/w while
the 1" and higher kits do not, as that h/w would be included in
kits C or D.
- If the 9th/10th body mounts are not desired (kit BBw or BBw), do not order them and advise whether you want the body lift blocks and hardware for those body mounts if you plan to add your own brackets or plan to do so in the future.
- If ordering the body mount brackets for install with an existing body lift kit and you want hardware, add $10 to the kit price.
-
Kits including poly bushings will include either spacers or lift blocks
of varying heights.
- This is done to make up the height differences of the factory rubber body mounts and the replacement poly mount bushings.
- If you want the spacer color to match the bushing color, you can either paint the spacers or add the CLR option to get those spacers in black.
- If you add up the height of the spacer (or taller lift block) and the height of the poly bushing, it should be of comparable height to the rubber bushing.
-
If you have an existing body lift kit and wish to install a poly
bushing kit, you have two options.
- One is to order kit P and then place the spacers above or below your existing body lift blocks.
- Two is to order replacement body lift blocks (kit C or D)) along with the poly kit to get the lift blocks with integrated spacers as well as appropriately sized hardware for the lift+poly bushings.
- If installing a poly bushing kit after installing a body lift kit, you may find some of the bolts might be a bit too long since our poly bushings are shorter in overall height than the OEM bushings. If you find the nuts are bottoming out on the bolt threads, you can just add a washer or two between the nut and the bushing. This will take up the extra bolt shank length.
- The 1-piece body mounts that bolt to the frame assume re-use of the OEM mounting bolts. If you'ld like to replace those, add the Phw hardware kit that includes replacement bolts and nuts to secure the body mount flanges to the frame bracket.
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
1997-1999 (3rd Gen) 4Runner/Hilux Surf (US $):
| Kit | 0"/stock | up to 1" | 1.5" or 2" | 3" | Description |
| A | n/a | $ 40.00 | $ 50.00 | $ 60.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 48.00 | $ 62.00 | $ 76.00 | Ultimate Lift Blocks (2-2" OD and 8 - 2.5" OD) |
| C | $ 40.00 | $ 75.00 | $ 85.00 | $ 95.00 | Kit A+ Standard grade hardware |
| D | $ 40.00 | $ 83.00 | $ 97.00 | $111.00 | Kit B + Standard grade hardware |
| AL | n/a | $ 50.00 | n/a | n/a | Change kit A or C to ALuminum lift blocks |
| HD | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Upgrade Kit C or D to Heavy Duty bolts |
| HDn | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Upgrade HD kit to include Grade 8 nuts |
| HDw | $ 20.00 | $ 20.00 | $ 20.00 | $ 20.00 | Includes heavy duty, oversized washers for body mount bolts |
| SS | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to Stainless Steel hardware |
| MET | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to METric hardware |
| CLR | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Custom color lift blocks |
| FB | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Front bumper brackets, 1997-2000 typical |
| RAD | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Radiator drop brackets |
| SL | n/a | n/a | $ 15.00 | $ 20.00 | Shift Lever Extension (per lever), 2" and 3" lengths |
| SE | $ 5.00 | $ 30.00 | $ 45.00 | $ 55.00 | Steering Shaft Extension |
| BS | n/a | $ 8.00 | $ 10.00 | $ 12.00 | Bed Spacers, per pair |
| P1 | $190.00 | $180.00 | $180.00 | $180.00 | Polyurethane Body Mount Bushings(*) |
| Phw | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Polyurethane Body Mount h/w |
| DOC | $ 2.00 | $ 2.00 | $ 2.00 | $ 2.00 | B/W printed installation notes |
| CDOC | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | Full color printed installation notes |
| Typical | D+HDw+P1 | D+FB+SE | D+FB+SE+RAD | D+FB+SE+RAD | Typical Kit Contents |
| Cost | $250.00 | $133.00 | $182.00 | $206.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
For Heavy Duty (HD),
Stainless Steel (SS) or METric (MET) hardware upgrade,
kit C or D must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+SS upgrade.
- HDn swaps the grade 5 lock nuts for grade 8, n/a for METric or SS h/w upgrade
-
HDw adds hardened, oversized
bottom washers for the body mount bolts.
- Order these if you don't want to re-use your original bottom washers, especially recommended with Poly bushings since they don't normally come with new bottom washers.
- For ALuminum block upgrade (AL), kit C must also be ordered.
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
- With the 0" poly bushing kit (P1), this colors the 10 spacers to match the poly bushings.
- If removing a body lift with a rag joint steering extension, order the 0" SE kit item to get a pair of stock length rag joint bolts
-
* For poly bushings (kit P1),
default kit is one pair of 1-piece and 4 pair of 2-piece bushings (details here), this
covers 99% of these vehicles, but PLEASE be sure to verify your truck has
one pair of 1-piece bushings are the rear body mounts.
- If the A-pillar mounts are the same as the rear mounts, you NEED to order the P2 kit instead of the P1 kit.
- This is especially important to check on the 1999 models as some have the later style (P2) bushings while most have the earlier style (P1) bushings.
- The 1-piece body mounts that bolt to the frame assume re-use of the OEM mounting bolts. If you'ld like to replace those, add the Phw hardware kit that includes replacement bolts and nuts to secure the body mount flanges to the frame bracket.
-
Kits including poly bushings will include either spacers or lift blocks
of varying heights.
- This is done to make up the height differences of the factory rubber body mounts and the replacement poly mount bushings.
- If you want the spacer color to match the bushing color, you can either paint the spacers or add the CLR option to get those spacers in black.
- If you add up the height of the spacer (or taller lift block) and the height of the poly bushing, it should be of comparable height to the rubber bushing.
-
If you have an existing body lift kit and wish to install a poly
bushing kit, you have two options.
- One is to order kit P(1 or 2) and then place the spacers above or below your existing body lift blocks.
- Two is to order replacement body lift blocks (kit C or D)) along with the poly kit to get the lift blocks with integrated spacers as well as appropriately sized hardware for the lift+poly bushings.
- If installing a poly bushing kit after installing a body lift kit, you may find some of the bolts might be a bit too long since our poly bushings are shorter in overall height than the OEM bushings. If you find the nuts are bottoming out on the bolt threads, you can just add a washer or two between the nut and the bushing. This will take up the extra bolt shank length.
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
2000-2002 (3rd Gen) 4Runner/Hilux Surf (US $):
| Kit | 0"/stock | up to 1" | 1.5" or 2" | 3" | Description |
| A | n/a | $ 40.00 | $ 50.00 | $ 60.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 48.00 | $ 62.00 | $ 76.00 | Ultimate Lift Blocks (2-2" OD and 8 - 2.5" OD) |
| C | $ 40.00 | $ 75.00 | $ 85.00 | $ 95.00 | Kit A+ Standard grade hardware |
| D | $ 40.00 | $ 83.00 | $ 97.00 | $111.00 | Kit B + Standard grade hardware |
| AL | n/a | $ 50.00 | n/a | n/a | Change kit A or C to ALuminum lift blocks |
| HD | $ 15.00 | $ 15.00 | $ 15.00 | $ 15.00 | Upgrade Kit C or D to Heavy Duty bolts |
| HDn | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Upgrade HD kit to include Grade 8 nuts |
| HDw | $ 20.00 | $ 20.00 | $ 20.00 | $ 20.00 | Includes heavy duty, oversized washers for body mount bolts |
| SS | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to Stainless Steel hardware |
| MET | $ 35.00 | $ 35.00 | $ 35.00 | $ 35.00 | Upgrade Kit C or D to METric hardware |
| CLR | $ 10.00 | $ 10.00 | $ 10.00 | $ 10.00 | Custom color lift blocks |
| FB | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Front bumper brackets |
| RAD | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Radiator drop brackets |
| SL | n/a | n/a | $ 15.00 | $ 20.00 | Shift Lever Extension (per lever), 2" and 3" lengths |
| SE | $ 5.00 | $ 30.00 | $ 45.00 | $ 55.00 | Steering Shaft Extension |
| BS | n/a | $ 8.00 | $ 10.00 | $ 12.00 | Bed Spacers, per pair |
| P2 | $290.00 | $280.00 | $280.00 | $280.00 | Set of 10 Polyurethane Body Mount Bushings |
| P3 | $270.00 | $260.00 | $260.00 | $260.00 | Set of 8 Polyurethane Body Mount Bushings |
| P4 | $ 90.00 | $ 90.00 | $ 90.00 | $ 90.00 | Set of 2 rear Polyurethane Body Mount Bushings |
| Phw | $25.00 | $25.00 | $25.00 | $25.00 | Polyurethane Body Mount h/w |
| DOC | $ 2.00 | $ 2.00 | $ 2.00 | $ 2.00 | B/W printed installation notes |
| CDOC | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | Full color printed installation notes |
| Typical | D+P2 | D+SE | D+SE+RAD | D+FB+SE+RAD | Typical Kit Contents |
| Cost | $330.00 | $113.00 | $162.00 | $206.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
For Heavy Duty (HD),
Stainless Steel (SS) or METric (MET) hardware upgrade,
kit C or D must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+SS upgrade.
- HDn swaps the grade 5 lock nuts for grade 8, n/a for METric or SS h/w upgrade
-
HDw adds hardened, oversized
bottom washers for the body mount bolts.
- Order these if you don't want to re-use your original bottom washers
- This option is now included with the Poly body mount bushing kits, P2 and P3.
- For ALuminum block upgrade (AL), kit C must also be ordered.
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
- If removing a body lift with a rag joint steering extension, order the 0" SE kit item to get a pair of stock length rag joint bolts
-
Polyurethane body mount bushings:
- Availability: P2 & P3 kits are special order, limited supply on P4 bushings
-
Kit P2includes a total of:
- 4 - 1 piece bushings (A pillar and rear of vehicle) and 2 small - and 4 large - 2 piece bushings for the rest of the body
-
Kit P3includes a total of:
- 2 small / 4 large 2-piece bushings and 2 1-piece bushings for the A-pillar
- This kit is intended for customers that have already replaced the rear most 1-piece bushings with polyurethane and wish to replace the remainder.
-
Kit P4includes a total of:
- 2 1-piece bushings for the rear of vehicle
- This kit is intended for customers that want to replace the rear most 1-piece bushings with polyurethane.
- There may be some minor variations in these models with respect to bushing heights. So if you want to check and send us a list of your upper bushing heights, we can match that up with the information we have for these poly bushing kits, or we can just use our default set of bushing heights.
- The 1-piece body mounts that bolt to the frame assume re-use of the OEM mounting bolts. If you'ld like to replace those, add the Phw hardware kit that includes replacement bolts and nuts to secure the body mount flanges to the frame bracket.
-
IMPORTANT NOTES ON POLY BODY MOUNT BUSHINGS ~2000 MODELS:
- If your vehicle has an additional pair of 1-piece bushings under the A-pillar (i.e. the same kind of bushings as at the rear of the vehicle), then be sure to specify/order the bushing P2 kit to ensure you get a kit with 2 pair of 1-piece and 3 pair of 2-piece bushings.
- Some 2000 models have just the rear pair of 1-piece bushings (bushing brackets bolt to the frame) and some models have 2 pair, so that the A-pillar and rear bushings are the same type. THE ONLY WAY TO TELL WHICH YOU HAVE is to crawl under the truck and look. If the A-pillar bushings (under the front of the front doors) look like the bushings at the rear of the vehicle, you need kit P2, if those bushings look like the ones under the rear door, then you need kit P1, see the 1997-1999 table.
-
Also, some rare 2000 models will have shorter bolts installed under the
A-pillar than under the B or C-pillars (remove a bolt in each location
and compare). If you see this on your vehicle, you can ask us to supply
a 1/2" shorter bolt for the A-pillar locations or you can simply
use a few extra washers under the nut on the bottom of the bolt to take
up the extra bolt length and allow the nut to be fully tightened.
-
The 2000 model 4Runners are transition models between the 1999 and
earlier and the 2001 and later 3rd gens. The only way to know which you
have is to look and see.
- It is likely that if your 2000 4Runner has the A-pillar and rear-most body mount bushings that are alike, this shorter bolt may be needed.
- On the other hand, if the A-pillar and B-pillar bushings are the same type, then you probably need the longer bolt.
- And if you don't want to check, the default longer bolt will work fine, you may just need to add a couple of washers between the nut and the bottom of the body mount bushings to take up the extra bolt length. That will work perfectly fine, it will not affect the strength or performance of the body lift or the body mounts, they can't tell if you have one, two or more washers.
-
The 2000 model 4Runners are transition models between the 1999 and
earlier and the 2001 and later 3rd gens. The only way to know which you
have is to look and see.
-
Kits including poly bushings will include either spacers or lift blocks
of varying heights.
- This is done to make up the height differences of the factory rubber body mounts and the replacement poly mount bushings.
- If you want the spacer color to match the bushing color, you can either paint the spacers or add the CLR option to get those spacers in black.
- If you add up the height of the spacer (or taller lift block) and the height of the poly bushing, it should be of comparable height to the rubber bushing.
-
If you have an existing body lift kit and wish to install a poly
bushing kit, you have two options.
- One is to order kit P (1 or 2) and then place the spacers above or below your existing body lift blocks.
- Two is to order replacement body lift blocks (kit C or D)) along with the poly kit to get the lift blocks with integrated spacers as well as appropriately sized hardware for the lift+poly bushings.
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
2003-2009 (4th Gen) 4Runner/Hilux Surf and Lexus GX/LX-470(US $):
| Kit | 0"/stock | up to 1/2" | up to 1" | 1.25" or 1.5" | 2" | Description |
| A | n/a | $ 40.00 | $ 40.00 | $ 48.00 | $ 52.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 46.00 | $ 46.00 | $ 57.00 | $ 61.00 | Ultimate Lift Blocks (2-2"OD and 6- 2.5"OD) |
| BB | n/a | $ 76.00 | $ 76.00 | $102.00 | $102.00 | Mega lift blocks (2-2.5"6-3.5"OD) |
| C | $ 45.00 | $ 52.00 | $ 80.00 | $ 88.00 | $107.00 | Kit A+ Standard grade hardware |
| D | $ 45.00 | $ 58.00 | $ 86.00 | $ 97.00 | $116.00 | Kit B + Standard grade hardware |
| DD | n/a | $ 88.00 | $116.00 | $142.00 | $142.00 | Kit BB + Standard grade hardware |
| HD | $ 15.00 | $ 5.00 | $ 15.00 | $ 15.00 | $ 25.00 | Upgrade Kit C/CC/D/DD to Heavy Duty hardware |
| SS | $ 35.00 | $ 10.00 | $ 35.00 | $ 35.00 | $ 40.00 | Upgrade Kit C/CC/D/DD to Stainless Steel hardware |
| MET | $ 25.00 | $ 10.00 | $ 25.00 | $ 25.00 | n/a | Upgrade Kit C/CC/D/DD to stock size metric hardware |
| SE | $ 5.00 | n/a | $ 40.00 | $ 40.00 | $ 50.00 | Steering Shaft Extension |
| CLR | n/a | $ 8.00 | $ 8.00 | $ 8.00 | $ 16.00 | Custom color lift blocks |
| RAD | n/a | n/a | $ 20.00 | $ 20.00 | $ 20.00 | Radiator drop brackets |
| SL | n/a | n/a | n/a | $ 15.00 | $ 15.00 | Shift Lever Extension (per lever), M12x1.25, 1.5" length |
| DOC | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | $ 4.00 | B/W printed installation notes |
| CDOC | $ 8.00 | $ 8.00 | $ 8.00 | $ 8.00 | $ 8.00 | Full color printed installation notes |
| Typical | D | D | D+RAD | D+RAD+SE | D+HD+RAD+SE | Typical Kit Contents |
| Cost | $ 45.00 | $ 58.00 | $106.00 | $157.00 | $211.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
Block size:
- Standard blocks: 8 @ 2" (~53mm) diameter
- Ultimate blocks: 2 @ 2", 6 @ 2.5" (~65mm) diameter
-
Mega blocks: 2 @ 2.5", 6 @ 3.5" (~90mm) diameter
- Note these are the block diameters, not the block (lift) height
-
Which to choose?
- Standard size offers the lowest cost
- Ultimate size is our most popular size combination for most vehicles
-
Mega size would apply if the body mounts on your vehicle match the
diameters shown in the table and you wish to have the lift block size
match that of the body mount bushings
- If your vehicle doesn't have the extra large diameter body mounts, the mega size lift blocks may not sit up flush to the bottom of the body, so be sure to check prior to ordering
- And if you think there's a better mix of lift block diameters that would meet your requirements, please contact us with the particulars, we'll be happy to work up a custom designed mix of blocks just for you.
-
For Heavy Duty (HD)
or METric (MET) hardware upgrade, kit C D
or DD must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+MET upgrade.
- METric hardware is of course the same size/grade/strength as stock, choose this option for easiest installation.
- Above 1.5" lift height, the extra long bolts required are only available in the HD grade 8 version, so the HD hardware must be added
-
Specify if you would like undersize (7/16") or oversize
(1/2") hardware if you do not opt for METric:
-
Oversize hardware is stronger but may require that body
mount washers and bushings be enlarged slightly (to 1/2") to
install the larger bolts
- If this is an issue for you, select either an undersized hardware option or the METric hardware option.
- Unless otherwise specified, the oversize hardware will be assumed for both standard and heavy duty grade options, since most folks want the benefit of the stronger, oversized hardware.
-
This gives you the choice of 4 hardware options, since you can choose
from:
- Undersize - standard grade; ~16% weaker than stock
- Undersize - heavy duty grade; ~5% stronger than stock
- Oversized standard grade; ~12% stronger than stock (default for kits C or D)
- Oversized - heavy duty grade; ~40% stronger than stock (default for kits C+HD or D+HD)
- All hardware kits include longer bolts, nylon lock nuts and washers.
-
Oversize hardware is stronger but may require that body
mount washers and bushings be enlarged slightly (to 1/2") to
install the larger bolts
-
Special 1/2" kit combination includes the 8 - 1/2" tall lift
blocks plus 2 longer bolts (1/2" kit D) for the rear
pair of body mounts
- You can re-use the factory bolts for the other 6 locations, or if you want a full set of replacement hardware, use the up to 1" kit D pricing.
- Be sure and check the exposed thread on all 8 body mount bolts to ensure there's enough length left to fit the lift blcoks. On some models, you may find you need more than one pair of longer bolts. If so, let us know how many longer bolts you'll need, additional pair of std. grade bolts $12.00, in HD, $17.00 and in metric, $22.00
- The 1/2" lift kit is a good option is you install rock sliders or after market bumpers and find you have squeaking from the body contacting the new protection .
- It's also easy to install as you don't have to adjust steering, radiator or bumpers, just raise the body up, slide in the spacers and drop it back down.
-
New Mega size lift block kits (BB and DD) for those
models with body mount bushings larger than 2.5" in diameter.
- To order, substitute kit items BB or DD for B or D.
- If you already have a standard or ultimate body lift installed and you want to upgrade to the Mega lift blocks, simply order kit item BB in the height desired and then just swap out the old lift blocks for the new larger diameter version..
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
-
Steering extension (SE) typically required on lifts above 1", can
be installed on 1" lifts but may not be required
- With the 2" lift kit, some customers are finding the spacer for the 1.25"/1.5" lift is a better fit. That spacer is 7/8" tall, the one for the 2" lift is 1-1/4" tall.
- If you want to use the shorter spacer, just add the $40 SE instead of the $50 SE when ordering the kit and let us know you want the shorter spacer.
- If removing a body lift with a rag joint steering extension, order the 0" SE kit item to get a pair of stock length rag joint bolts
-
Lift height / Front bumper fit:
- 1" lift should not require any trimming for the front and rear bumpers is you have the heavy steel cross members behind them
- 1.25" lift most closely matches the offset of the front bumper mounting studs, so the bumper can be raised one set of studs and line up with minimal gap
-
1.5" will have a slight gap at the front bumper
- Note: 1.25" / 1.5" kits are separate, specify one or the other when ordering. Kits are not "adjustable", they are built to the height you order, same price for either height, but we need to know which height to make your kit.
- Above 1.5" you'll either have a larger front bumper gap or you'll need a custom front bumper built for the body lift height.
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
2010+ (5th gen) 4Runner / LX-460 (US$):
| Kit | 0"/stock | up to 1/2" | up to 1" | Description |
| A | n/a | $ 40.00 | $ 40.00 | Standard size Lift Blocks (all 2" OD) |
| B | n/a | $ 46.00 | $ 46.00 | Ultimate Lift Blocks (2-2"OD and 6- 2.5"OD) |
| BB | n/a | $ 76.00 | $ 76.00 | Mega lift blocks (2-2.5"OD,6-3.5"OD) |
| C | $ 45.00 | $ 52.00 | $ 80.00 | Kit A+ Standard grade hardware |
| D | $ 45.00 | $ 58.00 | $ 86.00 | Kit B + Standard grade hardware |
| DD | n/a | $ 88.00 | $116.00 | Kit BB + Standard grade hardware |
| HD | $ 15.00 | $ 5.00 | $ 15.00 | Upgrade Kit C/CC/D/DD to Heavy Duty hardware |
| SS | $ 35.00 | $ 10.00 | $ 35.00 | Upgrade Kit C/CC/D/DD to Stainless Steel hardware |
| MET | $ 25.00 | $ 10.00 | $ 25.00 | Upgrade Kit C/CC/D/DD to stock size metric hardware |
| CLR | n/a | $ 8.00 | $ 8.00 | Custom color lift blocks |
| RAD | n/a | n/a | $ 20.00 | Radiator drop brackets |
| DOC | $ 4.00 | $ 4.00 | $ 4.00 | B/W printed installation notes |
| CDOC | $ 8.00 | $ 8.00 | $ 8.00 | Full color printed installation notes |
| Typical | D | D | D+RAD | Typical Kit Contents |
| Cost | $ 45.00 | $ 58.00 | $106.00 | + applicable sales tax and shipping/ordering |
- Notes:
-
Block size:
- Standard blocks: 8 @ 2" diameter (~53mm)
- Ultimate blocks: 2 @ 2" diameter, 6 @ 2.5" diameter (~65mm)
-
Mega blocks: 2 @ 2.5" diameter, 6 @ 3.5" diameter (~90mm)
- Note these are the block diameters, not the block (lift) height
-
Which to choose?
- Standard size offers the lowest cost
- Ultimate size is our most popular size combination for most vehicles
-
Mega size would apply if the body mounts on your vehicle match the
diameters shown in the table and you wish to have the lift block size
match that of the body mount bushings.
- If your vehicle doesn't have the extra large diameter body mounts, the mega size lift blocks may not sit up flush to the bottom of the body, so be sure to check prior to ordering
-
For Heavy Duty (HD)
or METric (MET) hardware upgrade, kit C D
or DD must also be ordered
- Hardware upgrades are mutually exclusive in that only one can be ordered, e.g. there is no HD+MET upgrade.
- METric hardware is of course the same size/grade/strength as stock, choose this option for easiest installation.
-
Specify if you would like undersize (7/16") or oversize
(1/2") hardware if you do not opt for METric:
-
Oversize hardware is stronger but may require that body mount washers
and bushings be enlarged slightly (to 1/2") to install the larger
bolts
- If this is an issue for you, select either an undersized hardware option or the METric hardware option.
- Unless otherwise specified, the oversize hardware will be assumed for both standard and heavy duty grade options, since most folks want the benefit of the stronger, oversized hardware.
-
This gives you the choice of 4 hardware options, since you can choose
from:
- Undersize - standard grade; ~16% weaker than stock
- Undersize - heavy duty grade; ~5% stronger than stock
- Oversized standard grade; ~12% stronger than stock (default for kits C or D)
- Oversized - heavy duty grade; ~40% stronger than stock (default for kits C+HD or D+HD)
- All hardware kits include longer bolts, nylon lock nuts and washers.
-
Oversize hardware is stronger but may require that body mount washers
and bushings be enlarged slightly (to 1/2") to install the larger
bolts
-
Special 1/2" kit combination includes the 8 - 1/2" tall lift
blocks plus 2 longer bolts (1/2" kit D) for the rear
pair of body mounts
- You can re-use the factory bolts for the other 6 locations, or if you want a full set of replacement hardware, use the up to 1" kit D pricing.
- The 1/2" lift kit is a good option is you install rock sliders or after market bumpers and find you have squeaking from the body contacting the new protection .
-
New Mega size lift block kits (BB and DD) for those
models with body mount bushings larger than 2.5" in diameter.
- To order, substitute kit items BB or DD for B or D.
- If you already have a standard or ultimate body lift installed and you want to upgrade to the Mega lift blocks, simply order kit item BB in the height desired and then just swap out the old lift blocks for the new larger diameter version..
-
CLR option, black is the default custom color
- If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
- The natural block color is white
-
Typically the 5th gen 4Runners lack the bolted steering shaft rag
joint, precluding any bolt-in steering shaft extension.
- If you wish a taller lift and can modify your own steering shaft to suite, order the desired 4th gen kit (w/o the steering extension).
- YouTube video on LX-460 body lift install
- n/a = Not Applicable or Available for a given lift height
- Note: OD = Outer Diameter
- Prices (US $) do not include sales tax or shipping
- Effective 01.JAN.2025, 4Crawler Offroad as ceased production of our body lift kits.
- We'll be releasing some of the 3D CAD files if you want to make your own kit...
- [Return to the top of the page]
NOTES:
We have a limited stock of items such as steering and driveshaft spacers, Bilstein shocks available. Let us know what item(s) you're looking for, where and how you'll want them shipped to and we'll get back to you with a shipping quote and purchase information:
| 4Crawler Offroad contact link | MissingLinkZ contact link |
We've SOLD OUT of our body lift kits. We'll shortly be posting links to on-line 3D CAD files if you want to make your own.
We have chosen to make ordering a simple one-click process. Rather than having a shopping cart system where you may need to click on half a dozen "Add To Cart" and "Check Out" buttons to place your order, all you have to do is click on the one "Buy Now" button below and then enter a short description of what you want and how much those parts cost.
-
Add up the cost (in US $) of each item you want included in your body
lift kit:
-
Typical kit contents and totals are listed in the tables above
-
If using Paypal directly (i.e. not using the pre-computed shipping buttons below),
be sure to include applicable sales tax and postage in your total.
- Add 9.0% sales tax for shipments to a California address:
- Automatically added if using the Buy Now buttons below
- If your billing address is outside of California, no sales tax applies
- For US addresses, $16.95 for uninsured or $18.95 for insured Priority Mail shipping
- 2-3 day typical Priority Mail delivery time
-
If using Paypal directly (i.e. not using the pre-computed shipping buttons below),
be sure to include applicable sales tax and postage in your total.
- Or use one of the two "Buy Now" buttons below to include shipping and applicable sales tax automatically
-
International
shipping options:
- US Mail shipping to Canada: US$59.95 for all the above kits
- US Priority Mail shipping to Europe/Central and South America: US$82.95 for most items
- US Priority Mail shipping to Asia/Australia/New Zealand: US$89.95 for most items
- For total weight up to 20 pounds
- Typical shipping time is 6-10 days
- Additional shipping and tracking information
- Currency conversion
-
Typical kit contents and totals are listed in the tables above
- Specify the year, cab style (uninsured, extra, double cab), 2WD/4WD and cab-only or full bed for the Tacoma, various models require slightly different hardware
- Questions?
Ordering and shipping options below:
-
Whatever ordering option you use, please be sure to DOUBLE
CHECK YOUR SHIPPING ADDRESS prior to submitting the order.
- Orders will be shipped to the address you specify, if that address is incorrect, your order may be delayed
- Returned orders will be reshipped at your expense.
- We'll try to correct the address if you send it to us, but we do get SO MANY orders with incorrect addresses it is hard to keep track of which is which, so your best shot is to give us your correct address to begin with.
The two "Buy Now" buttons below left and center add US postage automatically and all 3 add applicable sales tax. If you included postage in your parts total,l use the "Buy Now" on the right. If you use any of the three "Buy Now" below, do not include CA sales tax in your parts total.
 |
|
|
| Purchase w/ uninsured US shipping - Adds US$16.00 postage |
Purchase w/ insured
US shipping - Adds US$18.00 postage |
Purchase w/ other shipping option - Include shipping cost in order total |
-
Click here for an order form tutorial
-
In the Payment For field, enter the vehicle and lift
desired:
- For example: 2" Body lift for XYZ, Items: A+B+C
- No need to spell out the kit options, that is why we use simple letter codes to make it easy to enter and easier than clicking on a half dozen "Add To Cart" buttons to enter your order.
- And if you want to add something else to your body lift kit order, no problem, add a short description of it and be sure to include the cost in the parts total (above).
- In the Price field, enter the parts total for the lift, including shipping if using the custom shipping button above
- You can log into an existing Paypal account or enter your credit card information if you don't have or want to use a Paypal account
-
In the Payment For field, enter the vehicle and lift
desired:
-
Via PayPal:
-
https://www.paypal.com/
- Login, select: Send Money
-
Recipient = sales@4Crawler.com
- Hint: Cut and paste this into the Recipient field
-
Enter Amount:
- Be sure to include shipping in the total
-
Select Funds Source (e.g. checking account, credit
or debit card)
- Using an e-check results in a 3-4 day delay for the funds to clear Paypal
- For Transaction Type, select: Goods, Non-Auction
-
Enter Subject/Note describing items desired
- For example: 2" Body lift for XYZ, Items: A+B+C
- No need to spell out the items, just use the letters and some sort of separator.
-
Check for correct shipping address and hit the "Send"
button
- If in doubt on the address, (or you want to use a different address) please include the address you want to use in a separate e-mail to us.
- Double check the shipping address before hitting the "Send" button
-
Notes:
- Company name will show up as "Visual Diagnostics/4Crawler Offroad"
- Feel free to e-mail 4Crawler Offroad to let us know you issued the payment, although we automatically get an e-mail notification to this effect.
- If you prefer, 4Crawler Offroad can issue a PayPal funds request/invoice as well
- You should receive a confirmation e-mail from Paypal if the transaction was successful.
- If you don't have a Paypal account, its easy to set one up using the link above, enter your name/address/e-mail and account info.
-
https://www.paypal.com/
-
Credit Card via fax/mail/e-mail: FAX:+01.772.264.8458
-
Supply the following information:
- Name
- Billing/Shipping address
- Phone # and e-mail address
- Credit Card number
- Expiration Date
- And the 3 or 4 digit security code on the back (or front) side of the card
-
Supply the following information:
-
Via mail; credit card information, certified check/money order payable to (US funds):
- 4Crawler Offroad
- Attn: Roger Brown
- PO Box 61092
- Sunnyvale, CA 94088-1092 USA
- Via USPS-COD (Collect On Delivery - US only) there is an additional charge for USPS-COD, typically $12.00 (varies with order total)
- Forum, military and dealer discount information.
-
Kits are built to order.
- Typical fabrication and shipping time as noted.
After 25 years in operation, it's time to close up shop and move on to other adventures. Thanks to all the loyal customers over the years that helped to make this all possible. The web site will remain live.
[Return to the top of this page][Last updated: 04.January.2025 ]
Visitor # 40198 since 30.NOV.2017