Mitsubishi Montero/Pajero

Custom Search

NOTE: Due to high order volume and supply chain issues, it may take some time for deliveries, production and shipments to catch up. Order backlog could be up to 8 weeks.

Contents:

• Introduction
• Notes and ordering information
  • Returns and exchanges
  • Cancellation Policy
• Return to the main Body Lift page

Introduction:

For the Montero vehicles, the 2" body lift is the most popular height ordered. Many folks reporting the ability to fit 33" tall tires after installing a 2" body lift, given a reasonable wheel and tire combination.

There are 3 basic body mount variations for the Mitsubishi Montero/Montero Sport//Pajero and Dodge Raider, Hyundai Galloper vehicles (Gen-I and Gen-II) models, through last model year of body on frame construction), based upon the number of body mounts present, that being:

• 8 Mounts - short wheelbase
• 10 Mounts - short wheel base
• 12 Mounts - Long wheel base

Kits for the Dodge D50 or MityMax pickups

How to determine which type of kit you need for your vehicle?

• The best way to tell is to climb underneath the vehicle and count the body mounts.
  • There will be a pair up front under the radiator.
  • There will be a pair in back under the rear door.
  • Then there will be pairs (same on each side) from the front to the back, typically located under each pillar of the body.
    • There are generally two under the A-pillar (under the windshield)
    • Two under the B-pillar (back side of the front doors)
    • Then 0 or more mounts towards the back of the vehicle:
      • 4-door vehicles will typically have mounts under the C-pillar (back side of the rear doors)
      • Sometimes there is an additional pair of mounts behind the rear wheel wells.
    • 2 door models usually have 8 or 10 mounts
    • 4 door models usually have 10 or 12 mounts
  • If you don't want to bother checking, just order the 12-mount kit (D12) and you'll have all the blocks and bolts you'll need.

Hardware is available in several options:

• Note that some vehicles use 1" longer body mount bolts for the rear.
  • Longer bolts can be requested at time of order if you have found your vehicle requires this
  • Or, for convenience, order the Extra long Hardware (EH) option to get both long and short rear bolts
  • The need for longer rear bolts is usually visually obvious as their heads of the bolts will sit on top of the floor instead of being sunk below the floor level like the other bolts (bolts may be hidden behind the rear corner trim panels).
  • Or you can simply remove one rear bolt and one of the other bolts and compare the lengths to see if you require the longer bolts.
• Standard grade (Grade 5) hardware is included in kits Dxx, includes longer bolts/nuts/washers for each body mount location
  • Hardware may be upgraded to Heavy Duty (Grade 8) by ordering the HDxx option
  • Hardware may be upgraded to Stainless Steel (316 alloy) by ordering the SSxx option
    • Note that the HDxx or SSxx hardware options (mutually exclusive) replace the standard grade hardware in kit Dxx, you'll only receive one set of body mount bolts
• 1.5" or 2" denotes the option of 1.5" or 2" lift, one or the other, it's not adjustable in height
• We can also produce tapered or progressive body lift kits for custom applications:
  • In a tapered lift, the lift block heights are stepped up or down from front to back to help level the vehicle.
  • Add US$50.00 (item: TAPER) to the cost of the maximum desired lift kit and supply us with the following information:
    • Lift height front and rear as well as the horizontal distance between the body mount locations starting at the front:
    • For example: Front-A = ", A-B = ", B-C = ", C-Rear = " for the 5 pair of body mounts.
  • For example with a lift tapering from 2" in front to 1" in back would raise the front end 1" higher than the back if that were your goal.
• Shift lever extensions (kit SL) for the Montero vehicles now available, fits shifters with screw-on knobs with M10-1.25 thread pitch.
• Bed Spacers (kit BS) can be used to support the center of the cargo bed over the rear wheels, if needed
• Polyurethane body mount bushings to replace the stock rubber bushings, if needed.
  • Poly bushing examples.
  • On some Generation 2 Monteros, the front pair of body mounts is a 1 piece unit and can't be replaced.
    • If so, leave these body mounts as-is and replace the remaining ones.
  • For bushings, search for Prothane 4-104
    • These bushings are available in BLack and Red (Add -BL or -R to the basic part number)
    • They come as a set of 6 bushings, which will work for the D50/MityMax pickups
    • For the 8, 10, and 12 mount Montero/Pajero models, order 2 kits if needed.
• Some customers have reported good results with using the standard Toyota Radiator drop brackets on the Montero vehicles.
  • If your radiator is held in place with 4 bolts (approx. 8mm in dia.) that either screw into the radiator flange or into the front core support on the body, then you can add a set of RADiator brackets to your lift kit order by adding the kit item "RAD" to the parts list and US$20.00 to the kit price.
• In the pricing tables below, the "Typical Kits" for each given lift height and vehicle is listed, both in an itemized list at the bottom of each lift height and as bold text in the table columns.
  • The "Typical Kit" contains those parts typically needed to lift a typical vehicle that height, thus the name "Typical Kit".
  • A typical vehicle is one that is somewhat close to stock, that is has the stock engine, stock steering, stock bumpers, etc.
  • Feel free to add or subtract from the typical kit as your needs dictate;
    • So if you wish to upgrade to the Heavy Duty hardware, add the HD option to your kit and adjust the price accordingly.
    • Clicking on the links under the DESCRIPTION column in the tables below take you to a DESCRIPTION OF THE ITEM.
    • If an item price is listed under a given height but not highlighted as part of the typical kit, that means it is not typically ordered as part of the typical kit, but can be installed if desired. Consult the installation notes for that item to see what other options are available in lieu of installing that particular item.
    • If an item is listed as "n/a" under a given lift height, it is "not applicable" or "not available" at that given height.
    • If you want to order that kit or item, click on the shipping/ordering link.
• NOTE: Pricing on this page reflects the "kit discount" on certain items when purchased as part of a body lift kit.
  • For ordering individual items, consult the main body lift kit page...

8 Body Mounts - short wheelbase (prices in US $):

Notes:

• n/a = Not applicable or not available for a given height
• HD/SS/MET: For Heavy Duty/Stainless Steel/METric hardware upgrade, kit C or D must also be ordered
  • Kits A8/B8 include the lift blocks-only, there's no hardware to upgrade
• EH: Some vehicles require extra long hardware at the rear, you can check ahead of time or order the EH option to get the extra long hardware just in case.
• CLR option, black is the default custom color
  • If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
  • The natural block color is white
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

10 Body Mounts - short wheelbase (prices in US $):

Notes:

• n/a = Not applicable or not available for a given height
• HD/SS/MET: For Heavy Duty/Stainless Steel/METric hardware upgrade, kit C10 or D10 must also be ordered
  • Kits A10/B10 include the lift blocks-only, there's no hardware to upgrade
• EH: Some vehicles require extra long hardware at the rear, you can check ahead of time or order the EH option to get the extra long hardware just in case.
• CLR option, black is the default custom color
  • If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
  • The natural block color is white
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

12 Body Mounts - long wheelbase (prices in US $):

Notes:

• n/a = Not applicable or not available for a given height
• HD/SS/MET: For Heavy Duty/Stainless Steel/METric hardware upgrade, kit C12 or D12 must also be ordered
  • Kits A12/B12 include the lift blocks-only, there's no hardware to upgrade
• EH: Some vehicles require extra long hardware at the rear, you can check ahead of time or order the EH option to get the extra long hardware just in case.
• CLR option, black is the default custom color
  • If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
  • The natural block color is white
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

D50/MityMax pickups:

Kits options support 6 cab and 8 bed mounts. Standard lift blocks are all 2" dia. ultimate lift blocks are 2.5" dia. for the cab, 2" dia. for the bed. Prices in US$.

Notes:

• n/a = Not applicable or not available for a given height
• Note that some MityMax/D50 pickup models may have small "cups" under the cab that the cab mount bushings fit into. If those cups are smaller than ~2.5" in dia. then you'll need to oder the standard lift block kits (A or C) and not the ultimate block kits (B or D) since the ultimate block kits have the larger 2.5" dia. cab lift blocks. So make sure to check where the cab sits on the cab mounts and see if that is a large flat area or a small round cup and order accordingly.
• HD: For Heavy Duty hardware upgrade, kit C or D must also be ordered
• CLR option, black is the default custom color
  • If you wish to paint your blocks a custom color, order the CLR option and we'll prep the blocks for painting and you can paint the blocks upon receipt
  • The natural block color is white
• Prices (US $) do not include sales tax or shipping
• Notes and ordering information
• Return to the top of this page

NOTES:

Our default shipping method is USPS mail and default payment option is Paypal. If you wish to use a different shipping or payment method, please contact us prior to ordering. Let us know the item(s) you want, where and how you'll want them shipped to and we'll get back to you with a shipping quote and purchase information:

NOTE: Beginning 01.Jan.2021, we'll no longer be able to accept orders shipping to the UK via our on-line order system due to the VAT requirements. Click here for alternate ordering options.

You can check the USPS shipping suspension page for world-wide shipping status.

We have chosen to make ordering a simple one-click process. Rather than having a shopping cart system where you may need to click on half a dozen "Add To Cart" and "Check Out" buttons to place your order, all you have to do is click on the one "Buy Now" button below and then enter a short description of what you want and how much those parts cost.

• Add up the cost (in US $) of each item you want included in your body lift kit:
  • Typical kit contents and totals are listed in the tables above
    • If using Paypal directly (i.e. not using the pre-computed shipping buttons below), be sure to include applicable sales tax and postage in your total.
      • Add 9.0% sales tax for shipments to a California address:
      • Automatically added if using the Buy Now buttons below
      • If your billing address is outside of California, no sales tax applies
    • For US addresses, $16.95 for uninsured or $18.95 for insured Priority Mail shipping
    • 2-3 day typical Priority Mail delivery time
  • Or use one of the two "Buy Now" buttons below to include shipping and applicable sales tax automatically
  • International shipping options:
    • US Mail shipping to Canada: US$59.95 for all the above kits
    • US Priority Mail shipping to Europe/Central and South America: US$82.95 for most items
    • US Priority Mail shipping to Asia/Australia/New Zealand: US$89.95 for most items
    • For total weight up to 20 pounds
    • Typical shipping time is 6-10 days
    • Additional shipping and tracking information
    • Currency conversion
• Specify the year, cab style (uninsured, extra, double cab), 2WD/4WD and cab-only or full bed for the Tacoma, various models require slightly different hardware
• Questions?

Ordering and shipping options below:

• Whatever ordering option you use, please be sure to DOUBLE CHECK YOUR SHIPPING ADDRESS prior to submitting the order.
  • Orders will be shipped to the address you specify, if that address is incorrect, your order may be delayed
  • Returned orders will be reshipped at your expense.
  • We'll try to correct the address if you send it to us, but we do get SO MANY orders with incorrect addresses it is hard to keep track of which is which, so your best shot is to give us your correct address to begin with.

The two "Buy Now" buttons below left and center add US postage automatically and all 3 add applicable sales tax. If you included postage in your parts total,l use the "Buy Now" on the right. If you use any of the three "Buy Now" below, do not include CA sales tax in your parts total.

Purchase w/ uninsured US shipping - Adds US$16.00 postage	Purchase w/ insured US shipping - Adds US$18.00 postage	Purchase w/ other shipping option - Include shipping cost in order total

• Click here for an order form tutorial
  • In the Payment For field, enter the vehicle and lift desired:
    • For example: 2" Body lift for XYZ, Items: A+B+C
    • No need to spell out the kit options, that is why we use simple letter codes to make it easy to enter and easier than clicking on a half dozen "Add To Cart" buttons to enter your order.
    • And if you want to add something else to your body lift kit order, no problem, add a short description of it and be sure to include the cost in the parts total (above).
  • In the Price field, enter the parts total for the lift, including shipping if using the custom shipping button above
  • You can log into an existing Paypal account or enter your credit card information if you don't have or want to use a Paypal account
• Via PayPal:
  • https://www.paypal.com/
    • Login, select: Send Money
    • Recipient = sales@4Crawler.com
      • Hint: Cut and paste this into the Recipient field
    • Enter Amount:
      • Be sure to include shipping in the total
    • Select Funds Source (e.g. checking account, credit or debit card)
      • Using an e-check results in a 3-4 day delay for the funds to clear Paypal
    • For Transaction Type, select: Goods, Non-Auction
    • Enter Subject/Note describing items desired
      • For example: 2" Body lift for XYZ, Items: A+B+C
      • No need to spell out the items, just use the letters and some sort of separator.
    • Check for correct shipping address and hit the "Send" button
      • If in doubt on the address, (or you want to use a different address) please include the address you want to use in a separate e-mail to us.
      • Double check the shipping address before hitting the "Send" button
    • Notes:
      • Company name will show up as "Visual Diagnostics/4Crawler Offroad"
      • Feel free to e-mail 4Crawler Offroad to let us know you issued the payment, although we automatically get an e-mail notification to this effect.
      • If you prefer, 4Crawler Offroad can issue a PayPal funds request/invoice as well
      • You should receive a confirmation e-mail from Paypal if the transaction was successful.
  • If you don't have a Paypal account, its easy to set one up using the link above, enter your name/address/e-mail and account info.
• Credit Card via fax/mail/e-mail: FAX:+01.772.264.8458
  • Supply the following information:
    • Name
    • Billing/Shipping address
    • Phone # and e-mail address
    • Credit Card number
    • Expiration Date
    • And the 3 or 4 digit security code on the back (or front) side of the card
• Via mail; credit card information, certified check/money order payable to (US funds):
  • 4Crawler Offroad
  • Attn: Roger Brown
  • PO Box 61092
  • Sunnyvale, CA 94088-1092 USA
• Via USPS-COD (Collect On Delivery - US only) there is an additional charge for USPS-COD, typically $12.00 (varies with order total)
• Forum, military and dealer discount information.
• Kits are built to order.
  • Typical fabrication and shipping time as noted.

NOTE: Due to high order volume and supply chain issues, it may take some time for deliveries, production and shipments to catch up. Order backlog could be up to 8 weeks.

[Last updated: 13.September.2024 ]

Visitor # 60383 since 03.APR.2002